Special work

Impounding and emergency tanks very often show minor cracks in the insulation layer created by the dispersive coats of paint and thin epoxide layers. Untightness occurs very often on the contact points of the wall and the bottom. Collectors are untight and do not meet their function, the liquid disappears without trace and it leads to the contamination of soil and underground waters.

Euromant is a dissolvent-free two-component layer based on polyurethane. Surface treatment with Euromant is a long-term elastic layer, tight and resistant to weather conditions, oil substances and chemicals.

Systémom Euromant* je možné utesnenie staticky vyhovujúcich havarijných jímok, starých a nových záchytných vaní a stáčacích plôch pre olej a ropné látky. Euromant is used for the insulation of bridges.

Adalastic 2000 is a fast implementable system of emergency tank reconstruction. The system shall ensure tightness of concrete, steel or asphalt concrete surfaces of emergency tanks. Owing to the high elasticity of the insulation membrane at more than 300 %, it is also possible to reconstruct the panel surfaces of collectors; the system excellently reconstructs the expansion joints or cracks of the surfaces and the reconstructed collector is tight in the long run. The system maintains its elastic qualities also at the temperature of - 200C. The system may be equipped with a conductive layer in order to increase the operating safety; it is suitable for the insulation of emergency collectors, storage tanks for diesel, petrol, aviation fuel or other oil and chemical substances.

From the technology aspect, we are prepared for the daily performance of laying the insulation membrane Adalastic 2000 in the amount of 600 m2.